connexx software for Rexton Reach

Hi, I have the Rexton Reach and am looking for the latest Rexton Connexx download. Can someone please help?
 
Hi, I just got new Rexton Reaches from Costco. It's difficult to get applies at my local Costco. Is there software available that will allow me to permanently adjust the R/L volume balance? And to add bass response to the Bluetooth setting? I'm assuming that if such software exists that it can communicate with the hearing aids via Bluetooth. Thanks
 
waterloofox said:
Is there software available that will allow me to permanently adjust the R/L volume balance? And to add bass response to the Bluetooth setting?
Click to expand...
Yes, you can use the hearing aid fitting software namely (Connexx 9.12.3/RexFit9.12.1 for Rexton Newer/Current).
waterloofox said:
I'm assuming that if such software exists that it can communicate with the hearing aids via Bluetooth.
Click to expand...
No, it communicates using a different wireless protocol, namely BLE - Bluetooth Low Energy. And besides, it does not communicate directly with the hearing aid. You must use a hearing aid programming device, namely Noahlink Wireless 2.

Also; the DIY School Hearing Aids (v2.2) access portals are at your finger tips via 24/7 cloud storage access.
  • Start here → DIY School Hearing Aids (v2.2) to find the access portals
  • You can easily find the Access Portals again/anytime, by clicking any PVC Avatar (click twice - counting the 2nd popup Avatar)
  • When logged in, you can find the Access Portals again/anytime, by clicking a Link in my Signature
  • And finally, you can perform a simple Internet search for "DIY School Hearing Aids"
 
I have a new pair of Rexton Reach inoX-CIC Li.
I'd be grateful if someone could point me to the Rexton Connexx newer/current software.
 
Thanks, pvc, for providing the software link which I installed without any issues (Windows 10).

I have a new Noahlink Wireless 2 programming device, but it refuses to detect/connect to my HAs.
(Rexton Reach iX-CIC Li 80, aka "Reach inoX-CIC Li").

I've updated the Noahlink Wireless driver and firmware from himsa.com and it seems to be recognized fine and Windows says it's functioning correctly. I've repeatedly reset the HAs (put in the charging case for several seconds, then removed). The Connexx software only says "No hearing aids detected".

What am I missing?
 
Back
Top