connexx software for Rexton Reach

Hi, I have the Rexton Reach and am looking for the latest Rexton Connexx download. Can someone please help?
 
Hi, I just got new Rexton Reaches from Costco. It's difficult to get applies at my local Costco. Is there software available that will allow me to permanently adjust the R/L volume balance? And to add bass response to the Bluetooth setting? I'm assuming that if such software exists that it can communicate with the hearing aids via Bluetooth. Thanks
 
waterloofox said:
Is there software available that will allow me to permanently adjust the R/L volume balance? And to add bass response to the Bluetooth setting?
Click to expand...
Yes, you can use the hearing aid fitting software namely (Connexx 9.12.3/RexFit9.12.1 for Rexton Newer/Current).
waterloofox said:
I'm assuming that if such software exists that it can communicate with the hearing aids via Bluetooth.
Click to expand...
No, it communicates using a different wireless protocol, namely BLE - Bluetooth Low Energy. And besides, it does not communicate directly with the hearing aid. You must use a hearing aid programming device, namely Noahlink Wireless 2.

Also; the DIY School Hearing Aids (v2.2) access portals are at your finger tips via 24/7 cloud storage access.
  • Start here → DIY School Hearing Aids (v2.2) to find the access portals
  • You can easily find the Access Portals again/anytime, by clicking any PVC Avatar (click twice - counting the 2nd popup Avatar)
  • When logged in, you can find the Access Portals again/anytime, by clicking a Link in my Signature
  • And finally, you can perform a simple Internet search for "DIY School Hearing Aids"
 
I have a new pair of Rexton Reach inoX-CIC Li.
I'd be grateful if someone could point me to the Rexton Connexx newer/current software.
 
Thanks, pvc, for providing the software link which I installed without any issues (Windows 10).

I have a new Noahlink Wireless 2 programming device, but it refuses to detect/connect to my HAs.
(Rexton Reach iX-CIC Li 80, aka "Reach inoX-CIC Li").

I've updated the Noahlink Wireless driver and firmware from himsa.com and it seems to be recognized fine and Windows says it's functioning correctly. I've repeatedly reset the HAs (put in the charging case for several seconds, then removed). The Connexx software only says "No hearing aids detected".

What am I missing?
 
Hi. I'm also looking for the Connexx9.12.3 RexFit9.12.1 for Rexton software. Anyone know where I can find it?
 
New diyer here. Can someone share the link for Connexx9.12.3 RexFit9.12.1 for Rexton please? I just received mine about 3 weeks ago and just want the ability to add or substitute the optional programs and do a backup. Thank you in advance!
 
Last edited:
Hello:
Can you share with me the link for the Connexx software? I should be getting my new Rexton Reach soon!
I got my Noahlink wireless 2 from Aliexpress for $120, the best price I've found. I've been using them with my Phonak HAs and it works great.
Thanks!
 
Hello, trying to find Rexton Connexx 8 for M-Core (not sure if Connexx 9 can read it?) any help, would be appreciated.
 
Oticon said:
Hello, trying to find Rexton Connexx 8 for M-Core (not sure if Connexx 9 can read it?) any help, would be appreciated.
Click to expand...
Connexx 9.12.3/RexFit9.12.1 for Rexton Newer/Current should work. What is your issue? What hearing aid programming device are you using? Which M-Core model hearing aids do you have?
 
pvc said:
Connexx 9.12.3/RexFit9.12.1 for Rexton Newer/Current should work. What is your issue? What hearing aid programming device are you using? Which M-Core model hearing aids do you have?
Click to expand...
Hi, I'm using Noah-Link wireless and the model is Rexton M-Core R312 20
 
Back
Top