ProFit 2.0.10068.0

B

bray79

New Member
Joined
Dec 19, 2023
Messages
1
Reaction score
1
Hi Im looking for a download for the Starkey ProFit 2.0.10068.0 and the Inspire software. I've downloaded the PatientBase but am struggling to compete the next steps. Any help is appreciated!
 
Hi bray; Welcome.

Yep, the install procedure for Starkey PatientBase, Inspire, and ProFit are a little complex at this point-in-time. Please read a DIY School Hearing Aids PDF file named (01 Free Hearing Aid Fitting Software). Here's a clip from that PDF file below. Though, I will delete the clip later because it tends to become obsolete so reading the DIY School PDF file is best because it is kept up-to-date;

c2.jpg
 
Last edited:
Read your PM/Conversation in a short while for information on how to find;
  • PatientBase Setup 27.0
  • ProFitSetup 2.0
  • Starkey Inspire X 2023.1
 
If you become interested in the Multi-Brand capabilities of Starkey then read a DIY School Hearing Aids PDF file named (Unlocking ReBranded Hearing Aids);

Your options for Starkey ReBranded models;
AudigyGroupFitting
AmplifonFitting
AudibelFitting
AudikaFitting
AudioSyncGeneralFitting
HorexFitting
KINDFitting
LisoundFitting
MedtronicFitting
MicroTechFitting
Starkey
NuEarFitting
VisaudioFitting
MiracleEar
 
Last edited:
Install Steps:
Download the 3 components, then:
  • Install PatientBase Setup 27.0.10001.0 and restart your PC
  • Install ProFitSetup 1.0.35068.0 aka/2023.2
  • Install Starkey Inspire X 2023.1 (aka InspireSetup 27.1.10048.0)
Important: Run PatientBase (not the fitting software)!! The first time you run PatientBase, you will be asked to specify a username and password. Remember username and password and keep it in mind or you will be locked out of PatientBase!

You can use Windows / Control Panel / Programs and features
to select an Uninstall each component and then start over.
 
Last edited:
Can u ask about profit software is it better than inspire x.?..
 
إنه للمعينات السمعية الجديدة و Inspire إذا كان للمعينات السمعية القديمة.
مقطع / نص من ملف PDF لمدرسة DIY School (01 برنامج مجاني لتركيب المعينات السمعية).
برنامج ProFitSetSetSetup 2.0.10068.0 مخفي. هذا الإصدار مخصص للموديلات الأحدث/الحالية بدءًا من Genesis.
برنامج Starkey Inspire X 2023.1 (المعروف أيضًا باسم InspireSetup 27.1.10074.0) مخفي/في بعض الأحيان. حاول البحث وقد تجد هذا الرابط → Inspire X 2023.1 Inspire X 2023.1 Inspire X 2023.1. أسماء المعينات السمعية القديمة: (Evolv AI، Livio Edge AI، Livio Edge AI، Livio Edge AI، Livio Edge AI، Picasso Custom، Halo iQ، Muse iQ، Muse، Muse، SoundLens Custom، Synergy iQ، Synergy Custom، Halo 2، Halo، Halo، Halo، Halo، Z Series، 3 Series، Xino، Ignite، Ignite، Ignite، Ignite، E Series، Zon، Aries،
--
Starkey ProFitSetup 2.0.10068.0 is for New hearing aids and Starkey Inspire X 2023.1 if for Legacy hearing aids.
Clip/text from DIY School PDF file (01 Free Hearing Aid Fitting Software).
  • ProFitSetup 2.0.10068.0 is hidden. This version is for newer/current models starting with the "Genesis" model.
  • Starkey Inspire X 2023.1 (aka InspireSetup 27.1.10074.0) is hidden/sometimes. Try a search and you might find this link → Inspire X 2023.1. Names of old hearing aids: (Evolv AI, Livio Edge AI, Picasso Custom, Halo iQ, Muse iQ, Muse, SoundLens Custom, Synergy iQ, Synergy Custom, Halo 2, Halo, Z Series, 3 Series, Xino, Ignite, E Series, Zon, Aries, Destiny).
 
Last edited:
I'm new here. I have the Patient Base installed, and now need the ProFit. I have the Genesis AI HA, Any help is greatly appreciated.
 
Hey Joe; Welcome; Read you PM/Conversation in a short while for information about how to find Starkey ProFit.

Also; You can read the DIY School (v2.2) PDF file named (**01 Free Hearing Aid Fitting Software**) where you will find detailed instructions on how to install;
* PatientBase 27.0.10001.0
* Starkey ProFitSetup 2024.1 (or latest) for newer/current hearing aids
* Starkey Inspire X 2023.1 for older/Legacy hearing aids

Also;
pvc said:
If you become interested in the Multi-Brand capabilities of Starkey then read a DIY School Hearing Aids PDF file named (Unlocking ReBranded Hearing Aids);
Click to expand...
 
Last edited:
HoH Joe said:
I'm new here. I have the Patient Base installed, and now need the ProFit. I have the Genesis AI HA, Any help is greatly appreciated.
Click to expand...
Hello Joe, I also have the Genesis AI (24), how did you go about getting the PatientBase 27.0.10001.0 software, I am going around in circles trying to understand how to find it. Any help is appreciated. Thanks

201reyes
 
Hi @201reyes Welcome;
Please Read you PM/Conversation in a short while for information about how to find;
  1. PatientBase Setup 27.0.10001.0
  2. Starkey Pro Fit 3.0.10106.0
 
Hello,
I would like to adjust my hearing aids (Starkey Genesis 24 AI) myself or update them via software.
I have
- Patient base 28.0.10003
- NoahLink 2 wireless
What I'm missing is the ProFit software.
Does anyone have a link for me to download?
Thanks for the help.
 
Hi @Alfred3001 Welcome;
Please read your PM/Conversation for info on how to find Starkey Pro Fit Setup 3.0
 
Hi pvc,

I'm an old timer from other hearing aid forums in the past and your name and thumbnail look familiar!

I have been using Inspire/Patientbase to adjust all of my older Starkey hearing aids for the past 10+ years but have recently gotten a pair of Evolv AI that are not supported. Can you share the link for ProFit with me?

Thanks much in advance!
 
Hi @cmb Welcome;
Yep, that was me until I got banned for opposing the the→ Big Town-Square Stoning event for the "three stooges". Pfft.

Please read your PM/Conversation for info on how to find Starkey Pro Fit Setup 4.0
 
Just for reference and to prevent confusion of anyone reading my earlier request for Pro Fit for Evolv AI: After installing Pro Fit I learned that for Evolv AI I actually needed Inspire X. Was able to find it. Thanks again pvc for your quick response and help.
 
Back
Top