Phonak target software 9.1

@Ratata22 Read your pm/Conversation Widex Compass GPS 4.8 for Legacy Widex Hearing Aid models
 
Hello, I have purchased a pair of Phonak hearing aids.

I would appreciate it if you could tell me where I can download Phonak Target so I can configure my hearing aids.

Thank you
 
Hi @Leotina Welcome;
Read your PM/Private Message/Conversation for information about how to find Phonak Target 10.0.0
You will need to purchase a Hearing Aid Programming Device, for example see this → post
 
Last edited:
Hoping for directions on obtaining recent enough Target download to configure a set of Lumity L70 aides. Noahlink purchased and en route.
 
Hi @Drrik Welcome;
Read your PM/Private Message/Conversation for information about how to find Phonak Target 10.0.0

Hopefully you mean Noahlink Wireless 2 or Noahlink Wireless because NOAHlink is an old obsolete hearing aid programming device.
Here's an image of old/obsolete NOAHlink. Don't get that!
iu

Noahlink Wireless 2. This is your Huckleberry;

noahlink_wireless2_productwithlogo-png.435

c1-jpg.428
 
I did mean the Noahlink Wireless. Coming to terms with the new terms. Have managed to download the 10.0; also got Microsoft .NET and the Visual Basic C++ thing loaded. Trying to figure out what to use equivalent to a setup.exe command to get it to launch. Nothing that seemed to resemble that in the files in the download. Was wondering if one of the MST files was supposed to serve that function.
 
Drrik said:
Have managed to download the 10.0
Click to expand...
The 10.0? I think you mean that you downloaded Phonak Target 10.0.0?

It's a .Zip file. Did you unzip it? (right-Mouse-Button click the .Zip folder and then choose Extract All)
After extracting the files, find setup.exe and double mouse-click that executable/(.exe) to install

MS .Net and C++ and whatever else is required will be installed by the one setup.exe file.
 
After installation, Click Windows Start, and then find and run the Target App.
 
Are you running Windows using emulation? That has a special situation you need to be aware of. Here's a clip from DIY School Hearing Aids (v2.2) PDF File named (Noahlink Wireless 2 - DIY User Guide);

Attention Apple Computer users: All hearing aid fitting software is designed to work only on Windows Operating Systems and not Apple/macOS. Though (in some cases) you can use Emulators on macOS (such as Parallels or Boot Camp). However!! Noahlink Wireless will not work for newer ARM technology (Apple silicon, M1, M2, M3) computers (even under emulation) because the ARM driver is not available for Noahlink Wireless. See the Appendix of this document for a list of Apple silicon computers.
 
Target 10.0 installed (finally) on PC and running. Waiting for new (lightly used) aides and the Noahlink Wireless to get here. Want to try to copy existing Phonak programming to the Lumity aides, as much as can be used.
 
Drrik said:
Waiting for new (lightly used) aides
Click to expand...
There is no option to copy the settings? What model are your older hearing aids.

Phonak does have a transfer feature. But pay attention to your old/new fitting formula, and your acoustics/vent size because the software can only guess about those external physical properties.
 
Hi @CichaWoda Welcome;
Read your PM/Private Message/Conversation for information about how to find Phonak Target 10.0.0
 
Can anyone link me to the latest Target software that will help me program my new Phonak L90 HA's on a Win 7 operating system?
 
I'm 86 and a bit rusty on procedure here. I have just bought a pair of Phonak L90's and my old version of Target won't update so I apparently need a link that will work to update to the most recent version of target that will work with Win 7. It is the only thing I have on my older HP laptop so I have no security concerns. I am using Hi Pro USB for my connection. Thanks for any help. This appears to be an amazing forum.
 
RICH 20 said:
Can anyone link me to the latest Target software that will help me program my new Phonak L90 HA's on a Win 7 operating system?
Click to expand...

RICH 20 said:
I apparently need a link that will work to update to the most recent version of target that will work with Win 7.
Click to expand...
HMm; I don't think that is possible for the Phonak Lumity models.

As per this link to → Phonak Audéo™ L Product information Page-3 the Phonak Lumity models require Phonak 8.0 or higher;

c1.jpg
AND the System Requirements for Phonak Target 8.1 (I don't have 8.0 but it will be the same) will not run on Windows 7 because the minimum Windows OS is Windows 8.1. Here's a copy of the system requirements for Phonak Target 8.1.

c2.jpg
 
Back
Top