Need programming software for Resound Linx2

[aud.aqeel]

Hi
Does anyone has the programming software for Resound Linx2 (LS562-DRW) hearing aid? I would be thankful if any member can send me the link to download.
Many thanks,
Aqeel.

 

[pvc]

You can read your PM/Conversation for info on how to find ReSound SmartFit 2.0 + Aventa 3 fitting software.

Though, choosing a hearing aid programming device gets a little complicated with older Legacy hearing aids. Here's a clip from a DIY School Hearing Aids Legacy (v2.2) PDF File named (Choose Hardware-Programming Device for ReSound);

ReSound Aventa 3 for Older/Legacy HAs: see ReSound Smart Fit Cable Guide

• Legend: NW = Noahlink Wireless/Caution: Noah, NOAHlink & Noahlink Wireless are 3 different things
• Legend: HP = (Hi Pro or mini Pro) with standard cs44 cables and also flexstrips or adapters
• 
  
• 2015-Q1 (LiNX2) Wireless custom, RIE, BTE = NW
• --(LiNX2 alternative) Custom, RIE: 61, Mini BTE: 67 = HP with Flexstrips
• --(LiNX2 alternative) RIE: 62, BTE = HP with original adapter
• 2015-Q1 (ENZO2) Wireless BTE = NW
• --(ENZO2 alternative) BTE: 88 = HP with Vea adapter
• --(ENZO2 alternative) BTE: 98 = HP with ENZO adapter
• 2015-Q3 Enya) Wireless custom, RIE, BTE = NW
• --(Enya alternative) RIE: 61 = HP with Flexstrips
• --(Enya alternative) RIE: 62, BTE = HP with original adapter
• 2014-Q1 (LiNX) Wireless BTE, RIE: 61 = NW
• --(LiNX alternative) RIE: 61 = HP with Flexstrips
• --(LiNX alternative) BTE = HP with original adapter
• 2014-Q1 (ENZO) Wireless BTE = NW
• --(ENZO alternative) BTE: 98 = HP with ENZO adapter
• 2012-Q3 (Verso) Wireless custom, RIE, BTE = NW
• --(Verso alternative) Wireless custom, RIE, BTE = HP with Flexstrips
• --(Verso alternative) , RIE: 62, BTE = HP with original adapter
• 2010-Q3 (Alera) Wireless custom, RIE, BTE = NW, Wireless custom, RIE, BTE = HP with Flexstrips, RIE: 62, BTE = HP with adapter
• --(Alera alternative) Wireless custom, RIE, BTE = HP with Flexstrips
• --(Alera alternative) RIE: 62, BTE = HP with original adapter
• 2012-Q3 (Vea) Custom = HP with Flexstrips, RIE: 62, BTE: 77, 88 = HP with adapter, BTE: 60, 70, 80 = HP with Vea adapter
• --(Vea alternative) RIE: 62, BTE: 77, 88 = HP with original adapter
• --(Vea alternative) BTE: 60, 70, 80 = HP with Vea adapter
• 2012-Q3 (Magna) BTE = HP with Vea adapter

 

[pvc]

HMm; I'm not so sure your pictured model is a → Linx2 (LS562-DRW)??

Perhaps it's a dot or a→ dot2 by ReSound?

 

[aud.aqeel]

Thanks @pvc

 

[pvc]

ReSound dot and dot2 are older than water and you would need to connect via Hi Pro or min Pro, standard cs44 cables and the 3-conductor flexstrips (which are not to be confused with Starkey Orange 3-conductor flexstrips).

 

[menglxs]

The hearing aid LS962-DRW can be programmed using the Noahlink wireless programmer.
All GN hearing aids with the letter ‘W’ in the model name can be programmed using Noahlink wireless. The letter ‘W’ indicates that the hearing aid has wireless functionality – a proprietary GN wireless technology. In addition to Bluetooth, Noahlink wireless also has a proprietary GN wireless technology.

 

[aud.aqeel]

The hearing aid LS962-DRW can be programmed using the Noahlink wireless programmer.
All GN hearing aids with the letter ‘W’ in the model name can be programmed using Noahlink wireless. The letter ‘W’ indicates that the hearing aid has wireless functionality – a proprietary GN wireless technology. In addition to Bluetooth, Noahlink wireless also has a proprietary GN wireless technology.

Thank you for the detailed reply.