Repeat in case you need to Translate to another language;
WIDEX PRO LINK SET-UP Get started with your PRO LINK by following these easy steps:
#1 Verify you have installed the latest Compass-`" GPS software by going to www.widexPRO.com or selecting the GPS Auto Updater in the bottom right corner of your computer screen.
#2 Fully charge your PRO LINK before connecting it to the computer.
Connect the docking station to a power outlet and place the PRO LINK fitting device on the docking station.
The green light on the fitting device will flash green while charging and will turn solid green when fully charged.
#3 Plug the Bluetooth adaptor into a USB port on your computer.
The light will be red until you turn on your PRO LINK.
#4 Turn on your PRO LINK by pressing the center button. The PRO LINK is pre-paired to the Bluetooth adaptor so no pairing is necessary.
Open Compass GPS and go to Session Start — Compass Setup —Interface and add the "PRO LINK with Bluetooth adaptor" and "PRO LINK with Micro USB cable" to the Current Interfaces list.
